Wet Mist & Particulates Air Testing |
Oil mist & other wet mists testing in Ireland. Airborne concentration is determined by drawing a known flow rate of air through Charcoal filter-media tubes for a specific amount of time. Samples are collected on-site using static pumps & mobile samplers for individual personnel while they are at their work station. |
Wet Sampling - Oil Mist in Air Sample Collection Service |
Oil Mist test determination by NIOSH 1500 Method. Charcoal sampling tubes are prepared and then examined by Gas Chromatography and Mass Spectrometry to determine the quantities of Oil Mist & identities of other chemicals present. The powerful analytical tool of Mass Spectrometry can accurately identify VOC’c & other chemicals that may be in the air. |
Oil Mist Testing by Gas Chromatography & Mass Spectrometry |
Dry Sampling - Airborne Particulates Sample Collection Service |
Gas Chromatography/Mass Spectrometry (GC/MS) analysis can provide unambiguous and sensitive detection for other chemical compounds at low concentrations .
Use EMIR’s GC/MS chemical testing lab in Ireland to identify organic thin-film contamination on products that may interfere with finished quality or even halt production of a manufacturing process. |
Mass Spectrometry for Other Chemicals Identification |
Air Quality & Asbestos Testing By Microscopy & Microanalysis |
Company Registration Number 422277
VAT Number IE 9654428R |
To contact us for more information on these services: |
EMIR, Ltd. Unit 2, Lissane Clarecastle, Co. Clare Ireland |
Air quality testing service collects airborne particulates onto filters suitable for Scanning Electron Microscopy (SEM) testing.
The Chemical testing of particulates viewed under SEM is performed by Energy Dispersive X-ray Spectroscopy (EDS) |
Air Particulates Imaged By SEM |
Air Particulates Identified By EDS |
Scanning Electron Microscopy (SEM) is used to make SEM movies and to image & accurately measure particulates that are suspended in the air. |
Energy Dispersive X-ray Spectroscopy (EDS) microanalysis can determine the chemical makeup of microscopic airborne particulates to test air quality. |
Charcoal Testing Tube For Wet Sampling |
Air Particulates - Dry Test |
Filter Membranes For Dry Sampling |
Chemical Molecules - Wet Test |
Our trained staff will come to your place of business to collect air samples over the course of 1 to 8 hours using both static and mobile units which can be worn by individuals at their work station.
Samples are then brought back to our laboratory where they are tested in Ireland to provide the client with reduced turn-around time and a faster service - No more time wasted shipping samples to the UK or even further for analysis!
Normal turn-around times from test to results are from 3 to 5 days. Some tests allow for more rapid turn-around times and are available to suit client’s needs when specially requested.
We can also analyse test medias collected by other air quality testing services or from your own in-house safety inspections.
The powerful micro-analytical tool combination of Electron Microscopy, Energy Dispersive X-ray Spectroscopy, and Mass Spectrometry all under one roof at our location offer an incredible ability to analyse airborne particulates and wet mists to give clear and unambiguous test results for invisible environmental hazards.
The responsible action of providing a healthy workplace has been shown to benefit everyone and creation of a more productive environment makes positive sense for every business that wishes continued success in the long run... |